DGT100R

Weight indicator/ repeater with large matrix display composed of very intense bright LEDs. Especially suitable for outdoor uses, it is clearly visible even in full sunlight and where it’s necessary to view from a distance at any angle. Case completely in IP68 stainless steel. CE-M approved (OIML R-76 / EN 45501). MID approved (OIML R-61).

Description

Main Features:

  • Functional 5-key waterproof keypad.
  • Large 6-digit display, 100 mm high, with very efficient SMD LEDs, complete of 6 LEDs for indication of active functions, visible from over 25 m, with viewing angle up to 120° and with power up to 750 mcd.
  • Software adjustment of the brightness intensity by keyboard.
  • AISI 304 stainless steel case  with IP68 protection  complete of wall fixing bracket .
  • Fitted with an  anti condensation air valve  for regulating the humidity and the pressure inside the indicator.
  • Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
  • Max. 10,000e or multirange 2 x 3000e @ 0.3 V/e in CE-M approved version for legal for trade use.
  • Max. 1,000,000 displayable divisions viewable with internal resolution up to 3,000,000 points.
  • Up to 8 signal linearization points with DINITOOLS.
  • A/D 24 bit sigma-delta 4-channel conversion, max.400 conv./sec. with automatic selection.
  • Connectable with up to 8 analogue load cells with 350 Ohm input resistance.
  • Management of a weighing system with up to 4 cells with digital equalization or management of up to 4 independent weighing systems.
  • Power supply from 12 to 24 Vdc with 110-240 Vac internal power supplier.
  • Available as Scale or as Repeater version.

I/O Section

  • RS232/C bidirectional port configurable for connection to printer, PC, or other external units.
  • RS485 bidirectional port configurable for connection to PC, PLC, or other external units.
  • PROFIBUS serial interface (DGT100PB model).
  • 2 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
  • 2 optoisolator photocouplers: 12÷24 Vdc, 5 mA min – 20 mA max, with configurable functions.
  • 16-bit analogue output (DGT100AN model) 4-20mA / 0-5Vdc / 0-10Vdc at choice; maximum applicable voltage: 300 Ohms; minimum applicable voltage resistance: 1 kohm.

Main Certifications:

  • EU Type Examination Certificate (45501:2015)
  • OIML R76
  • OIML R61 – MID
  • OIML R51

Brosur